Tag: PUMA MB.02

Let’s have a look at the inner structure of PUMA MB.02 today.

Splitting the left shoe of MB.02 from middle position

PUMA MB.02 A-A section

Separating the vamp and insole of right shoe

The bottom of shoe tongue uses big mesh fabric, which improve the air permeability. The inner sleeve design improve the fitness.

The integrated vamp fits the foot well.

The surface of shoe-pad is made of fabric material, and it’s printed with PUMA and Bauer’s personal logo.

The surface material of insole fabric is EVA.

The reverse side of insole fabric is non-woven material.

The insole uses full-length NITRO FOAM cushion technology with PEBAX cushion material.

The inner side of half sole is upturning design, which cover the insole to improve the stability.

The length of EUR42 half-sole PEBAX cushion material is about 43.57mm.

The width of EUR42 half-sole PEBAX cushion material is about 63.69mm.

The thickness of EUR42 half-sole PEBAX cushion material is about 4.70mm.

The length of EUR42 heelpiece PEBAX cushion material is about 36.97mm.

The width of EUR42 heelpiece PEBAX cushion material is about 43.35mm.

The thickness of EUR42 heelpiece PEBAX cushion material is about 4.71mm.

The heelpiece has surrounding TPU plate which is placed between the heelpiece and insole to improve the stability.

The thickness of EUR42 heelpiece surrounding TPU plate is about 2.03mm.

The arch TPU stabilizing plate is placed between insole and outsole.

The length of EUR42 TPU stabilizing plate is about 92.71mm.

The width of EUR42 TPU stabilizing plate front end is about 49.40mm.

The width of EUR42 TPU stabilizing plate rear-end is about 36.84mm.

The thickness of EUR42 TPU stabilizing plate is about 2.58mm.

The outsole uses one piece rubber.

The thickness of EUR42 half-sole rubber outsole is about 4.27mm.

The thickness of EUR42 heelpiece rubber outsole is about 5.35mm.

The thickness of EUR42 half-sole (insole+outsole) is about 18.57mm.

The thickness of highest point of arch position is about 24.25mm.

The thickness of EUR42 heelpiece (insole+outsole) is about 25.37mm, the drop height is about 6.8mm.

Let’s have a look at the difference of the MB.02 and MB.01 inner structure:

PUMA MB.02

PUMA MB.01

MB.02（L）& MB.01（R）vamp comparison

MB.02（L）& MB.01（R）shoe tongue comparison

MB.02（L）& MB.01（R）outsole and insole fabric comparison

MB.02（L）& MB.01（R）insole structure comparison

MB.02（above）& MB.01（below）insole A-A section comparison

MB.02（L）& MB.01（R）stabilizing plate comparison

MB.02（L）& MB.01（R）outsole pattern comparison

The thickness of EUR42 MB.02 half sole(insole+outsole) is about 18.57mm, and the thickness of heelpiece (insole+outsole) is about 25.37mm. The drop height is about 6.8mm.

The thickness of EUR42.5 MB.01 half sole(insole+outsole) is about 18.11mm, and the thickness of heelpiece (insole+outsole) is about 25.77mm. The drop height is about 7.66mm.

The deconstructed parts of MB.02

The deconstructed parts of MB.01

Deconstructed Report

Vamp: The vamp is made of lightweight engineering mesh fabric. The both sides of vamp uses hot-melting TPU material to improve the lateral support. The inner sleeve design improve the fitness.

Insole: It uses full-length NITRO FOAM cushion technology. And it’s also filled with PEBAX cushion material. It’s resilient. The resilient feedback is great. The arch TPU stabilizing plate with surrounding TPU plate offer excellent stability.

Overall: Based on PUMA MB.01, PUMA MB.02 has been upgraded. It reinforces the strength of vamp and adds PEBAX cushion material on the half-sole. The comfort level is obviously improved.

PUMA MB.02 has been released for several months. It has several colorways for your choice, such as MB.02 ROTY，MB.02 Sazaku, MB.02 JADE，MB.02 SLIME and MB.02 Rick and Morty.

PUMA MB.02 JADE

PUMA MB.02 Rick and Morty

PUMA MB.02 Rookie of the year

PUMA MB.02 SLIME

PUMA MB.02 Sazaku

PUMA MB.02 FLARE

Let’s have a look at the appearance details of PUMA MB.02 FLARE today.

PUMA MB.02 FLARE

The black and silver shoe box has featheriness window, and it’s printed with M.E.L.O. 02.

The shoe tag on the side of shoebox

The vamp is made of lightweight engineering mesh fabric. The shoe head position has big area of hot-melting material to improve the protection.

There are 8 couples of shoelaces holes. The stressing position is thickened, and the position of the last shoelace hole is placed behind the shoe tongue, so after fastening the shoelaces, it can fit the foot well.

It uses inner sleeve design to improve the fitness.

The outboard of vamp has the wing pattern. And the PUMA logo is hidden inside. The soft TPU material improve the lateral supporting performance.

The inner side red wing pattern is more aggressive.

The insole uses PUMA NITRO FOAM cushion technology. The lightweight low density foaming material integrate the soft comfort and energy feedback together.

The shoe heel has surrounding TPU plate. The three-dimensional Bauer’s logo is highly recognizable.

The outsole uses feather pattern. The pattern is dense, and it’s filled with a lot of herringbone pattern.

The surface of shoe-pad uses fabric material. It’s printed with PUMA logo and Bauer’s logo. The reverse side is brush coating.

The length of EUR42 shoe-pad is about 271mm.

The width of EUR42 half sole shoe-pad is about 93.68mm.The thickness of EUR42 shoe-pad is about 5.76mm.

The unit weight of EUR42 MB.02 is about 428.2g.